01. Product Introduction

Aimed at providing a seamless and efficient charging solution for CCS2 electric vehicles at GB/T charging stations. Ensure compatibility: Before using the GBT to CCS2 adapter, please refer to the product specifications and the requirements of your vehicle to ensure compatibility.

1. CCS2 Port

2. Product QR Code & IMEI Code

3. Type-C Port (manual firmware update usage)

4. GB/T Port

5. Status Indicator Light & Function Button

02. Usage Process & Bind Device

A - Usage Process

1. Fully insert the fast charging plug into the electric vehicle charging interface, making sure to fasten the latch. (Note: If you have never used this charging pile brand before, please scan the QR code on the charging pile to register and recharge your account.)

2. Insert the charging gun into the fast charging plug, ensuring that the latch of the charging gun is clipped onto the fast charging plug's buckle.

3. Once the charging pile shows a QR code, please use WeChat/Alipay (Chinese version) to scan the QR code to enter the mini program, and press the charging button to start charging. After starting the charge, the fast charging plug needs about 30-50 seconds to communicate with the charging station before charging can begin.

Note: After charging is completed, if you wish to use the fast charging plug again, you must wait for the indicator light on the fast charging plug to turn off for 3 seconds before pressing the start button.

B - Bind Device

1. Open the honmono APP on your phone and scan the QR code on the side of the plug.

2. Follow the prompts in the App to bind the device.

03. Update Firmware Program

The plug Pro can update the firmware via the OTA function. For more information, please contact our WhatsApp customer service colleagues.

04. VIN Code Plug-in Charging Technology (optional use/not use)

• Whether or not to use VIN code charging, the use of the plug is unrestricted, and it can be lent to an unlimited number of people without vehicle type restrictions.

• Each vehicle has its own unique Vehicle Identification Number (VIN). To use VIN code charging, you must first register your VIN code information at the charging station brand and recharge your account. Due to the use of the fast charging plug, the charging station will connect directly to the fast charging plug instead of directly to the car. Therefore, you can use the Honnmono APP to register/cancel the VIN code in the fast charging plug.

• Currently, brands that support VIN code charging include: Xiaoju Charging, Kaimasis, Xingxing Charging, and Southern Power Grid.

  
  

Note: Because Hong Kong license plates are different from those in mainland China, Xiaoju Charging cannot be registered directly in its application. However, you can provide proof of temporary entry vehicle operation, and we can assist you with the registration.

By following the steps above, you can successfully pair with the fast charging plug and use the VIN code plug-in charging technology. This technology is optional; once successfully paired, use will be unrestricted and can be lent to an unlimited number of people regardless of vehicle type. At the same time, we have listed brands that support VIN code charging and reminded you of the special requirements of Xiaoju Charging.

VIN Code Notice

1. VIN code plug-and-charge service requires vehicle verification after registration in the charging pile mini program to be activated.

2. Using the plug-and-charge service also requires scanning the product QR code on the plug in the honmono APP for binding.

3. The two VIN entries must be consistent; otherwise, it will result in the charging pile plug-and-charge being unsuccessful.

4. After a failed charging attempt, do not pull out the charging gun with the plug still attached without separating them and directly reinsert them into the vehicle's charging port, as this will also result in a failed charging attempt.

5. When charging fails, the charging gun and plug must be removed (the charging gun and plug must be separated), and they must be reinserted in order—first insert the plug into the vehicle's charging port and then the charging gun into the plug.

6. When charging from a charging pile, ensure that the vehicle is parked within the planned range. If the cable is pulled too long causing the charging gun to hover when inserting into the vehicle's charging port, this will cause charging failure and damage to the vehicle's charging port.

   
   

05.Notice

• Only clean with a dry cloth

• Avoid disassembly, dropping, or heavy impact

• It is recommended that users first choose the brands of large charging stations, such as: Xiaoju Charging, Fast Charge, Kaimasis, LeCharge, Ishite, Telai Electric, etc.

• If charging is unsuccessful, you can try other charging piles within the station; many users have reported that some charging piles may be broken.

06. Warranty

This product has a warranty of 2 years. Our plug warranty will be void if it is found to have been previously opened or to have incurred damage due to misuse, operational errors, negligence, vehicle accidents, or modifications. Our warranty only covers natural wear and tear.